Model

F110S

F110S V2

Picture

Camera Protector for Image Transmission

The antenna of image transmission without protector may be cut by the propellers or easily broken off.

The newly designed cover with specially developed mould ensures the fixed position of camera and antenna funtion and avoids the possible damage caused by putting in and taking out of the pack.

Propellers Protector

Props protectors directly installed on the motors. The possible collision may make motor leaned or rip out motor wires.

The props protetors  installed on the frame protect the props against collision and avoid the problems of bumping motors or ripping out wires caused by direct installation on motors.

Soft material limits the protection effect.

The developed mould strengthen the props protectors and the square design prevents pilots from being hurt by propellers. The pattened dual notches make (un)installation easy.

Propellers need to be uninstalled first each time to install the protectors, making propellers loose and steps annoying.

Dual notches installation reduces the tear and wear caused by repeatedly (un)installing propellers and ensures easy assemly.

Motor Crashproof

Two thirds of the motor is exposed, making it easily get bumped and affecst the flight. It requires manual adjustment of the motor position from time to time.

Two thirds of the motor is covered by the protector and ensures better persistence to possible collision and stable flight.

Battery Fixer

Battey fixed with rubber band and easily drops if bumped

The black plastic fixer at bottom ensures battery well

Battery Connector

JST connector, difficult to plug in and disconnect

PH2.0 connector,  easy to plug in and disconnect

The battery wire to the flight controller would be easily broken after multiple pullings

The improved PCB design guarantees the battery wire weld to the flight controller and it won't be easily broken.