搜索结果建议

    快速链接

    Specifications

    Aircraft

    Name: 
    F9A-B Brushless Soccer Drone
    Model: 
    LD-B20
    Takeoff Weight: 
    290g(Without Battery: 198g)
    Spherical Frame Diameter:
    218mm(8.58")
    Frame Wheelbase:
    110mm(4.33")
    Applicable Age: 
    Over 14
    Material: 
    Carbon Fiber (Frame), Plastic (Ball Shells, Battery Case)
    Working Modes:
    Altitude-hold Mode(Low Speed), Altitude-hold Mode(High Speed), Stabilize Mode, Turtle Mode, and Air Mode
    Flight Time: 
    5 Minutes
    Flight Distance:
    3000 Meters 
    Flight Environment: 
    Indoors/Outdoors
    Low Battery Alarm:
    The alarm voltage is 14.7V by default. When the battery voltage is lower than 14.7V, the T12D will emit a beeping alarm. And, the drone will automatically land when the voltage reaches 14V.
    LED Light Switch:
    LDZ-B20 has a tail LED light and a ring light strip. They have 7 colors that can be switched, namely red, green, blue, yellow, purple, cyan, and white. Short-press the button on the light board to switch their light color or turn off the light.

    Power System


    Motor:
    SZ-SPEED 1505-3150KV Brushless Motors
    Propeller:
    HQProp 3-inch (T3*3*3) Propellers
    Battery: 
    Gensace 4S 850mAh 40C Lipo Battery
    Flight Controller:
    RadioLink flight controller, compatible with a receiver with SBUS or CRSF signal
    ESC:
    RadioLink 40A 4-in-1 ESC
    Transmitter:
    RadioLink 12-channel transmitter T12D
    Receiver:
    R16SM
    Output Frequency:
    2.4GHz ISM band(2400MHz~2483.5MHz)
    Transmitter Power:   
    <100mW(20dBM) 
    Transmitter Operating Voltage:   
    7.4-15.0V DC
    Receiver Input Voltage:
    3-6V DC
    Control Distance: 
    about 3000 meters in the air (actual distance depends on the flight environment)
    Simulator Supported: 
    Beyond traditional simulators like Phoenix, the T16D features built-in simulator support (requires a firmware upgrade to V1.7.1). With no external dongle needed, connect to your computer via a Type-C cable to seamlessly support open-source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone - compatible with macOS and Windows systems.

    Remote Control System


    Charger: 
    Gensace B6
    Max. Charge Power:
    60W
    Max. Storage Power:
    3W Discharge, 60W Charge
    Input Voltage:
    5~20V
    Max. Input Current:
    DC 3A
    Output Voltage:
    DC 2.5~18V
    Charge Current:
    1-5A, Max. 5A (Auto adjustment)
    Balance Current:
    0.4A/Cell×2
    Supported Battery Types:
    LiPo/LiHv/LiFe(2~4S), NiMH(2~12S)
    Input port:
    QC/PD/BC1.2/TYPE-C V1.4/SDP/CDP/DCP/Apple 5V/2.4A
    (does not support 5V/1A adapter input)

    Charger - for Soccer Drone Battery Charging


    Charger:
    RadioLink CM210
    Max. Output Power:
    20W
    Input Voltage:
    5V
    Working Modes:
    Charging Mode
    Charging Precision:
    0.02V
    Supporting Battery:
    Only for 2S LiPo battery
    Charging Voltage:
    Max. 4.2V for each battery cell
    Charging Current:
    1.5A
    Balance Current:
    0.8A
    Max. Charge Power:
    9g(0.32oz)
    Power Supply Input Port:
    USB Type-C input

    Charger - for Remote Controller Battery Charging


    • 简体中文
    • English