How to upgrade AT10&AT10II firmware

 

1. Identify the transmitter version 


There are two leds on the transmitter: Red and Green. They will start flashing once the transmitter is connected with the computer via a USB cable and powered on.

a. If the red and green led flashes in turn, it means the mother board is the previous version, which is neither compatible with WIN8 nor WIN10 nor MAC. Users can only upgrade with the system of WIN 7 or XP. So please choose the firmware file with .bin at the end.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

b. If the red and green led flashes synchronously, it means the mother board is the current version, which is compatible with WIN8 or WIN10. Users can choose the firmware file with .mac at the end to upgrade.

 

2. Format the original firmware, copy and paste the latest firmware and disconnect the USB cable


Note

* Window as below will pop out to notify before format, click confirm to process. The format won't clear datas in your computer but only the firmware in your AT10II , which is the extra disk you connect to your computer.

* The two LEDs are always on during the copy process. Once the LEDs start flashing, the copy is done.

 

Video Tutorial  https://youtu.be/kIjNHObdDrg (01:20-- 03:30)

 

Note If the screen of your AT10II turns blank with leds on the transmitter flashing or upsaide down after upgrading the latest firmware above, it's because of the compatility probelm between LCD pannel and drivers. Please download the corresponding firmware to restore the display. After flashing the restoration firmware, the latest firmware can be flashed then. If  the problem still unsolved, please send mails to after_service@radiolink.com.cn or after_service1@radiolink.com.cn for tech support. 

version:AT10(AT10II)_Latestfirmware_V_1_4_1(bin).bin

version: AT10(AT10II)_Defaltfirmware_V1_2_9s(bin).bin

Latest Firmware:

Factory Default Firmware: 

  • AT10II/AT10 Firmware

 

 

version: AT10(AT10II)_Latestfirmware_V_1_4_1(mac).mac

Firmwares

Note Please be kindly noted that the AT10IIfirmware  V1.2.9 by factory setting is the fundamental one that can realize all basic controls. Users can flash the latest firmwares depending on the actual needs.
It’s NOT beacause Radiolink is selling the old version products in stock.

 

 

version: AT10(AT10II)_Defaltfirmware_V1_2_9s(mac).mac

Latest Firmware:

Factory Default Firmware: